Made at our plant in Huizhou since 2016. We supply black masterbatch to trim, dashboard and wire-harness makers who need stable color, low VOC and paperwork that passes the audit — without a trading-company markup in between.
Interior parts are judged on look, smell and consistency. We start from a proven low-odor base and adjust carrier, carbon loading and let-down ratio to your resin and process.
| Carrier resin | PP / ABS (other carriers on request) |
|---|---|
| Carbon black content | 30 – 50% (tuned to target jetness) |
| Standard grades | PP30F · PP103 — see the full TDS chart |
| Odor level | ≤ 3.0 by PV 3900 method (low-odor grades) |
| Dispersion | Released on filter-pressure test (ISO 23900-5); the batch CoA states the result with mesh size and test polymer |
| Melt flow (MFR) | Matched to your injection / extrusion process |
| Certifications | IATF 16949:2016, ISO 9001 / 14001 / 45001 |
Tell us your base resin and the odor / jetness target — we match a grade, not a catalog guess.
Your tier-2 / tier-3 traceability is covered. We issue certificate + CoA per lot, so the paperwork passes the audit.
Low-odor black masterbatch built for interior parts where VOC and smell matter to the end brand.
No trading-company layer. You get a firm factory quote and a faster answer — the margin stays in your cost.
Run a trial lot on your own line before you commit. We keep your spec confidential — we don't shop it around.
Typical interior and under-hood applications our black masterbatch is compounded for:
Uniform black, low gloss variation, stable across production lots.
PP / ABS carrier matched to the substrate for clean weld lines.
Consistent dispersion for thin-wall, color-critical parts.
Weather-stable options available for semi-exposed parts.
We run low-odor grades and can target odor levels by the PV 3900 method. Send your spec or the standard you must meet and we'll propose a starting grade.
Yes. Our plant is IATF 16949:2016 certified. Every shipment ships with a certificate and a Certificate of Analysis (CoA) for lot traceability. Read what the certification changes in practice →
For program launches we can provide the package an SQE expects: CoA per lot, material data, dispersion test results and traceability records. Tell us which elements your program requires (material test reports, PSW support and so on) and we will confirm exactly what we can deliver before you commit.
We support trial and small batches, not just full containers. Tell us the quantity and target resin — we'll quote both a trial lot and a production lot.
Trial lots ship in 5–10 days to most markets, quoted per RFQ. We pack them with your let-down guidance so your line can run it directly.
Every grade below is compounded in the same plant, with a full TDS and batch CoA per lot. Click through for the technical data.
Not sure which one fits? Compare all grades in one chart →
Tell us your base resin, target and quantity. We reply with a firm factory quote — and, if you want to test before committing, a free 1–5 kg sample compounded on your own carrier resin. No obligation.
Low-odour grades are compounded in a plant that runs IATF 16949:2016 alongside ISO 9001 / 14001 / 45001. This is the line and the lab.
Full factory tour —2:50 on YouTube
Two minutes and fifty seconds inside the Huizhou plant: raw-material dosing, compounding, pelletising, packing and the QC laboratory.
Watch the full tour on YouTube →
Factory-direct. Annual capacity 60,000 t/yr. Certification details on the certifications page.